Industrial NEws Buzz Master Bond EP17HT-3 is a one part epoxy that sets up in 20 to 30 seconds and snap cures in only 2 to 3 minutes at 250 deg F-300 deg F. As a one part system, no mixing is required and the epoxy can be cured in sections up to 1/4" thick. Moreover, its working life is indefinite as it will not gel until heated above 200 deg.F.

 

With a volume resistivity of greater than 1014 ohm-cm, EP17HT-3 has excellent electrical insulation and chemical resistance characteristics. It is resistant to a wide range of chemicals including water, oil and most organic solvents. Other typical features include a Shore D hardness that exceeds 85 and a tensile lap shear of 2100 psi.

 

Master Bond's EP17HT-3 adhesive has superior temperature resistance with a service operating temperature range of -60 deg F to +400 deg F. It is 100% reactive and contains no solvents or diluents. It is also available in a paste version called EP17HT-3ND and a slightly toughened variant called Supreme 17HT-3 which is ideal for bonding dissimilar substrates and applications subject to thermal cycling. Each product comes in half pints, pints, quarts, gallons and 5 gallon container sizes.

 

 Master Bond's EP17HT-3 one part snap curing epoxy features high temperature resistance and has outstanding electrical properties and chemical resistance. Read more about Master Bond's one part epoxy formulations at Mastebond's web site, or contact Master Bond's Technical Support Team by phone at +1-201-343-8983, by fax at +1-201-343-2132 

 

CONTACT: James Brenner, Marketing Manager Tel: 201-343-8983 Fax: 201-343-2132 MASTER BOND INC. 154 Hobart Street Hackensack, NJ 07601-3922